I found a mechanical problem in my frame build that required that I disassemble the frame and turn around the base plate.  The Y-belt was rubbing.  It took 2 hours take it apart and put it back together correctly.  Next, I started new Marlin program since the one I had was an older version.  3 hours.  Next I setup my extruder hotend and extruded some purple PLA.  The hotend works great.  220C quick!  The PID needs to be run the bed takes forever to heat up.  Also, I solved the x-axis end stop problem.  See the attached picture.



Lots of little things to do calibrations, (get the display to work--2 hours on that).